Showing posts with label electric heating and cooling. Show all posts
Showing posts with label electric heating and cooling. Show all posts

Advantages of Electric Heating and Cooling

Among the principal advantages of using electric heating and cooling systems are:

• greater safety

• quiet operation

• economy of space

• reduction of drafts

• reduction of outside noise

• uniform temperature

• structural design flexibility

Although the chances of an explosion in gas- or oil-fired heating systems have become very small because of the safety features built into these systems, an explosion simply cannot occur in electric heating system.

A properly installed electric heating and cooling system will last for years without any problems. If a problem occurs, resistance builds up in the line to the fuse or circuit breaker box. At certain point, the fuse will blow or the circuit breaker will trip, which will automatically shut off the electricity before any damage occurs.

Electric heating units are very compact and therefore utilize very little space. In baseboard systems, there is no need for ducts or pipes to carry a heat medium from its source to the space being heated. These factors offer a great degree of structural design flexibility because duct and pipe arrangements do not have to be taken into consideration. In addition, no chimney or flue arrangement is necessary.

If a structure is properly insulated for electric heating and cooling, there is a noticeable reduction of drafts and the degree of outside noise penetration. Moreover, uniform temperatures will prevail.

Finally, an electric heating system is generally quieter than other types because fewer mechanical parts involved in the electric system design. Quiet operation is particularly a characteristic of baseboard-type installations.

Disadvantages of Electric Heating and Cooling Systems

An electrically heated and cooled structure offers certain disadvantages when compared with other types of heating and cooling systems. When choosing an energy source for heating and cooling system, it is always necessary to weight the advantages and disadvantages of the system and its energy source carefully against the requirements you demand from them.

An electrically heated or cooled structure must be well insulated against heat gain or loss. If it isn’t, the cost of heating or cooling can be extremely high. For that reason, electric systems are rarely installed in existing structures, except in situations where a room is added or a basement is finished.

Electric heating and cooling systems generally have higher operating costs. These energy costs depend on the insulation type of the structure, orientation of the building, the total number of windows (total glass area), the cost of electricity where the structure is located, and the energy use habits of the occupants.

Another disadvantage of electric furnaces is that they are frequently oversized. An oversized electric furnace heats up and cools down too rapidly to maintain acceptable comfort levels in the rooms of the building. However, oversizing is not a problem limited to electric furnaces.

Heating and Cooling systems

The heating and cooling system is the heart of the house. When buying a house, at least you need to know:

- what kind of heating and cooling system is in place?

- what condition it is now?

- how much does it cost to operate?

Heating system types:


The most common heating systems include:

1) Forced Warm Air (FWA)

This is the most common type of the heating system. A furnace heats air, and a blower sends the hot air through the house. Return vents and pipes bring the cool air back to the furnace to be heated. Furnaces have a capacity rated in BTU's, which are simply British Thermal Units. The number of BTU's given represents the furnace's heat output from either gas, oil or electric firing.

2) Steam heating system

This kind of system usually found in older homes. A furnace heats water until steam forms. The steam circulates through pipes into radiators in the rooms. As steam cools, it turns back into water, which then returns to the furnace.

3) Hot water heating

This system works like a steam heat, but instead of circulating steam, it circulates hot water that heats the rooms.

4) Baseboard / electric heating

This system uses heating elements placed along the baseboards of walls.

5) Radiant heating system

This type of system uses pipes built into the floor and/or walls to heat the rooms.