What is a thermal plate in brazed plate heat exchanger?
Thus, in a brazed plate heat exchanger and PHE with a total of 40 plates, only 38 plates are thermal plates, regardless of the number of passes.
However, if one connector plate is used in between the plate pack, so that on fluid exchangers heat with two others, the plates on either side of the connector plate also do not transfer any heat, and out of total of 20 plates, only 16 will be thermal plates.
Brazing of flat plate heat exchanger
Brazing is well-suited to making leak-tight tubing joints like this because once everything gets hot enough the filler metal (the thin rod) melts it runs all the way around the joint.
The Importance of Keeping your Heat Exchanger Clean
An air-to-water heat exchanger is highly specialized equipment intended to be used when ambient or air temperatures are higher than 130 degrees Fahrenheit. Industrial air conditioners are unable to cool machinery when the ambient temperature is at that level, because the refrigerant their compressors produce is at around 150 degrees Fahrenheit, and there is too little difference between the two temperatures for the refrigerant to do its job. In cases such as these, air-to-water heat exchangers come into play. They bring the enclosure interior below the temperature of the ambient air so that the equipment can function properly.
At its most basic, heat exchanger air water cleaning is simply making certain that both the air and the water utilized to dissipate the heat from your process system are kept clean. If for instance the mechanism of your system that brings in the air is a cooling tower, you will have to realize that when it brings the air into your system, all the debris that happens to be in the air will enter the system along with it. This debris can then enter the system, build up within it, and restrict proper operation – and eventually cause a malfunction, perhaps even a serious one. So simply keeping your heat exchanger system clean would appear to be the solution to this problem.
However, critics have compared this to taking a cold tablet when one has a cold, and with good reason. While cleaning the heat-exchange system will ensure that it is free of anything that could cause problems, it does nothing whatsoever to prevent the problem from recurring, especially in areas where there is plenty of debris that could potentially cause some sort of jam. In that sense, simple cleaning will not be enough.
The ultimate solution, then, would be to install excellent filtration technology to keep the debris from entering the system in the first place, and combine this with diligent cleaning.
So ensure that you install the proper filters and filtration technology and religiously perform your heat exchanger air water cleaning operations to enable your entire system to function optimally.
By Sabrina Rocca
Compact heat exchangers
Applications and advantages of brazed heat exchangers
Brazed plate heat exchangers have the following advantages:
- High reliability due to design features and advanced technology manufacturing;
- High efficiency plate heat exchanger;
- Wide range of operating temperatures;
- High working pressure;
- High corrosion resistance of plate heat exchanger;
- Compactness and light weight plate heat exchanger;
- Small internal volume;
- Wide range of capacities and dimensions;
- Ease of installation and maintenance of plate heat exchanger;
- Low cost of plate heat exchanger.
Applications of brazed plate heat exchangers:
- Heating and hot water (steam and water heaters);
- Ventilation systems;
- Air conditioning in rooms and buildings;
- Refrigeration: Evaporators, Condensers;
- Consisting of heat pumps: evaporators, condensers, intermediate heaters and coolers;
- For different technological needs (coolers, heaters);
- Water heaters in pools, etc.
The design of brazed plate heat exchangers

Brazed Heat Exchangers consist of high quality steel plates that are vacuum brazed into one compact, pressure resistant block. For the solder are widely used copper or nickel. In assembling each second plate is rotated 180 degrees, forming a channel separation for the heat transfer medium.
For special applications (depending on type) may create a parallel stream media. Some profile plates or extra built-in turbulence plate provides a high degree of turbulence, which ensures efficient heat transfer even at low volume and reduces costs to a minimum the risk of contamination.
Heat exchangers for chiller applications
Numerous types of heat exchangers are used in chiller applications. They serve the specific purpose of controlling a system’s temperature by removing thermal energy. Although there are numerous sizes, levels of complexity and types of heat exchangers, they all use a thermally conducting element, typically in the form of a tube or plate, to separate two fluids so that one can transfer energy to the other.
When selecting the proper type of heat exchanger, one faces the fundamental challenge of fully defining the problem to be solved, which requires an understanding of thermodynamic and transport properties of fluids. This knowledge can be combined with simple calculations to define a specific heat transfer problem and to select the appropriate heat exchanger to use.
Fluid Flow Properties
Fluid flow inside the heat exchanger is a major consideration when selecting what type of exchanger is the best choice in a specific application. Fluid flow will be either turbulent or laminar. Laminar flow heat transfer relies entirely on the thermal conductivity of fluid to transfer heat to the heat exchanger surface. Laminar flows have lower film coefficients than turbulent flows.
Turbulent flows rely not only on thermal conduction but also thermal convection due to the increased fluid movement created in this type flow, thus producing better heat transfer. The higher film coefficients create less resistance to heat transfer.
The heat exchanger’s fluid flow can be determined from its Reynolds number. If the Reynolds number is less than 2,300, the fluid flow will be laminar. Fully turbulent fluid flow has a Reynolds number greater than 10,000. The transition region between laminar and turbulent flow produces higher thermal performance as the Reynolds number increases.
The type of flow determines how much pressure a fluid loses as it moves through the heat exchanger. This factor is important because higher pressure drops require greater pumping requirements. Laminar flow produces less pressure drop and increases linearly with the flow velocity.
This heat exchanger consists of a vertical set of plates welded together to form a cavity through which the colder fluid flows while the hotter fluid flows over the outside of the plates. The hot fluid cools as the fluid film flows down the plates. Most falling-film plates are embossed with intermittent welds placed throughout the plate surface. They can be single (top right) or double (bottom right) embossed.
Many types of heat exchangers are utilized in chiller applications. These range from shell and tube, brazed plate, semi-welded plate, welded plate and vertical falling-film plate. Each has specific characteristics that should be considered during the engineering selection process of a chiller system.
Shell-and-tube heat exchangers are used in applications where high temperatures and pressure demands are of great consequence. This type of design consists of a bundle of parallel tubes typically in a U-tube configuration. The bundle is supported by a series of baffles, which also helps to direct the flow across the tubes. Tubesheets close the ends and separate the two fluids.
The process fluid typically flows through the tubes to take advantage of the higher pressure capabilities inside the tubes and ease cleaning. The thermal performance of the shell-and-tube design generally is less than a plate design but the pressure rating is generally higher.
Brazed plate heat exchangers, like other plate heat exchangers, provide higher turbulent flow and heat transfer coefficients in a much smaller footprint. The plate material is typically AISI 316 type stainless steel. The herringbone plates are vacuum brazed to form the heat exchanger.
Brazed plate heat exchangers provide a highly efficient compact unit that will conserve space and reduce fluid volume requirements. Dual-circuit and double-wall models allow for numerous design options. The major factor to take into consideration is the fouling factor of the smaller channels. Because these units cannot be dismantled, filtration should be used on these heat exchangers.
Another variation of plate heat exchangers is the semi-welded plate heat exchanger. This type of heat exchanger utilizes the chevron-plate design to increase turbulent flow within the plate channels. The semi-welded heat exchanger consists of two plates laser-welded together into what is called a cassette. Plate gaskets seal between each cassette, and the cassettes are bolted together between end frames to retain the complete cassette pack. One fluid flows in the welded channel while the other flows through the gasketed channel.
Semi-welded plate heat exchangers have the same inherent advantages as all plate designs: higher turbulent flows, greater heat transfer coefficients and reduced fluid volume requirements. The largest difference with this design is the opportunity for expansion and ease of opening the unit for repair or cleaning. Cassettes can be added to increase the capacity of the heat exchanger.
The vertical falling-film plate heat exchanger design takes advantage of a large surface area for heat and mass transfer at the boundary of the two fluid flows. This design utilizes a vertical set of plates welded together to form a cavity through which the colder fluid flows. The hotter fluid flows over the external sides of the plates and is cooled when the film of fluid flows down the plate length. Typically, the plates are made of stainless steel for compatibility with sanitary fluids. An upper pan controls the external fluid flow with holes located over the plates.
This type heat exchanger allows closer approach temperatures between the fluids. The internal design of the plate cavity is critical. Most of these type of plates have an embossed design with intermittent welds throughout the plate surface. This helps to increase the turbulent flow inside the plates for higher heat transfer coefficients.
By considering the characteristics of the different types of heat exchangers at the beginning of a chiller selection, a more efficient system can be achieved.
Evolution of plate heat exchangers
Some of these modifications were driven by new strategies for making more compact equipment, some focused on overcoming disadvantages of PHEs, others on expanding the applications spectrum. That resulted mostly in variations of corrugation patterns of plate’s surfaces and altered construction.
Brazed plate heat exchangers are the most compact type of heat exchangers available on a market today. And it is the most efficient one.
Brazed plate heat exchangers are made of a pack of thin corrugated plates that are brazed together to form a durable, self-contained unit. Brazing eliminates the need of frames and gaskets, and results in a unit able to withstand higher pressure and temperatures compared to PHEs. They are compact and lightweight due to absence of frames.
Typical applications of brazed plate heat exchangers include heating and cooling in the process industry, evaporation and condensation in refrigeration systems, and other HVAC installations.
Use of Brazed Plate Heat Exchangers in Solar Heating Applications
One of the most important factors in determining the viability of a solar heater is its heat transfer efficiency. In simple terms, a good solar heater is one, which is able to transfer maximum amount of heat from the captured sunlight to the inner loop. A brazed plate heat exchanger is ideally suited for this purpose since it occupies much less space, is far more efficient and cost effective than other heat exchangers and is easy to maintain and clean.
Brazed plate heat exchangers in combination with domestic solar panels can be used for:
1. Supplying hot water
2. Heating radiant floors
3. Heating radiant walls
4. Heating water in swimming pools and spas
In all of these applications, solar energy is trapped by a solar panel that transfers the heat to the outer loop. This heat is then collected by a brazed plate heat exchanger where heat is transferred from the outer loop (from the panel) to the inner loop. The heated liquid of the inner loop can now be circulated through a water heater to heat water for domestic supply or passed through radiant walls and/or floors for domestic heating or passed through a swimming pool or spa for heating the water.
Brazed plate heat exchangers can easily handle high temperatures and pressures associated with the latest solar system designs and also keep the domestic water loop in complete isolation with the solar loop. This ensures complete safety of the system as well as long life.
Read more at: http://www.brazetek.com
Use of Brazed Plate Heat Exchangers in Hydronic Heating Applications
Looking for an efficient, compact and low cost brazed plate heat exchanger to fit your application? We have the solution!
Brazetek heat exchangers are engineered and manufactured utilizing the latest technological advancements and highest quality materials, and can be used for a variety of applications. From radiant heating and snow melting, to solar and hot water heating – we have the right model to fit your needs.
Technology:
To assure the highest level of performance, stainless steel plates are vacuum brazed together to withstand high pressure and temperature variations. The unique design of the plates allows the brazed plate heat exchanger to operate with turbulent flow, providing the maximum thermal efficiency. Such design helps to keep particles in the liquid in constant suspension and prevents them from settling, creating a self-cleaning effect.
Every unit is pressure tested and leak tested to ensure uninterrupted performance and long life.
Applications:
Radiant Heating Outdoor
Wood Stove Domestic
Hot Water Heating
Snow Melting
Solar Heating
Advantages:
Compact size
High heat transfer efficiency
Quick and easy installation
High corrosion resistance
Self-descaling design
We carry an extensive inventory of various models of brazed plate heat exchangers and in most cases can ship the same or next business day.
You can find more information at http://www.brazetek.com


